PuTTY | 終端機程式
本文轉貼自http://benjr.tw/?q=node/446[1]同事問我在Windows下面有沒有好用的終端機程式,類似hyperterminal的程式,追問下去才知道自從Windows2003開始hyperterminal就需要從新增移除程式去新增,到了Windows2008之後就再也不提供這一隻程式了,很可惜在我們工作環境還是需要透過序列埠Serial(Com)port去和一些設備做溝通,所以介紹他們使用這一套我常用的PuTTY(theTelnetandSSHclientitself)下載點:http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html[2]PuTTYUserManual:http://the.earth.li/~sgtatham/putty/0.58/htmld...
本文轉貼自http://benjr.tw/?q=node/446[1]
同事問我在 Windows 下面有沒有好用的終端機程式,類似 hyperterminal 的程式,追問下去才知道自從 Windows 2003 開始 hyperterminal 就需要從新增移除程式去新增,到了 Windows 2008 之後就再也不提供這一隻程式了,很可惜在我們工作環境還是需要透過序列埠Serial (Com) port 去和一些設備做溝通,所以介紹他們使用這一套我常用的 PuTTY (the Telnet and SSH client itself) 下載點:http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html[2]PuTTY User Manual:http://the.earth.li/~sgtatham/putty/0.58/htmldoc/[3]
PuTTY 不只提供了序列埠Serial (Com) port 的連接還可以使用在 Telnet / SSH ... 下載後不用安裝直接就可以使用,先來看看 serial 的設定.
在 Serial 可以針對序列埠 serial 選項做設定.預設的設定如下: Serial line to connect to “COM1(Serial A)” Speed(Baud Rate) “9600” Data bits "8"Stop bits "1"Parity "None"Flow Control “XONXOFF”設定好之後就可以回到 session 進行連線,在 "Connection type" 選擇 Serial 就會載入我們剛剛在 serial 所設定的設定值".我們可以將設定值做儲存,在 "Saved Sessions" 將這一次的設定記錄下來下次就不需要在做相同的設定了.
其他常用的設定
預設的自行很小所以在 Window / Appearance 可以自行設定顯示字型大小.在 Font settings 可以看到預設的字型,點選 "Change" 可以更改顯示的字型大小.
如果要將 console 的顯示過程記錄下來可以透過 Se...